Pajero Fuel Tank 3 Pajero 4
Stainless steel is an ideal material for the manufacture of fuel tanks. It is used in the most complex and demanding industries. Aviation, Medicine, Space, Marine, Chemical, Military Industry use this material as the most reliable and durable. It is because of the excellent corrosion and strength properties that we produce the Pajero Fuel Tank from stainless steel. This material is used by us not only for Mitsubishi Pajero tanks of the third and fourth generations. Almost all products manufactured by our company are associated with stainless steel. In the video we talk about the design of the tank and fuel neck. It's also about properly mounting these parts on your Pajero.
Material – Stainless steel AISI-304 (GOST – 08Х18Н10) Capacity long/short base – 97/80 liters. Wall thickness – 1.2 mm. Weight long/short base – 20/16 kg. Petrol/Diesel – Yes Partitions – Yes Fuel retaining cup – Yes Drain plug – Yes The thickness of the mounting brackets – 2 mm. Number of mounting points – 6 (original) Installation of native protection – Yes (With trimming) Installation of the native fuel gauge – Yes Installation of the original neck – Yes Installation of the native intake – Yes Fuel intake diesel made of stainless steel – Yes Warranty – 5 years. This fuel tank incorporates original design solutions. When designing the Fuel Tank on the Pajero from stainless steel, our many years of experience in the repair, operation and maintenance of the Pajero were used. The wishes of the owners of these machines were not left without attention. Below we present a few advantages of our tanks over the original tank and tanks of other manufacturers.
And the main thing is corrosion resistance! Our fuel tank will never rust! In fact, the tank of "stainless steel" is eternal. That is why we give a lifetime warranty on the resistance of the tank to corrosion. Neither aluminum nor iron can argue with stainless steel in resistance to oxidation. That is why they are additionally covered with a protective layer of paint! The material from which our tank is made is used in the food and chemical industry and does NOT NEED any protection against corrosion! I put it up and forgot it.
Increased volume of 97 liters. In relation to the original , this is a significant increase. The rest of the tanks are smaller.
With a wall thickness of 1.2 mm. the strength of our fuel tank on all modifications of the Pajero is one and a half times higher than the strength of the original tanks. And if we compare the strength of stainless steel from which our tanks and aluminum are made, the difference reaches THREE TIMES! This gives a stainless steel tank an undeniable advantage when operating an SUV in difficult road conditions and off-road.
Installation of the fuel tank is carried out on all points of the standard mounting of the Pajero.
The fuel supply and return pipelines are made of the same material as the tank. And they don't rust either!
The design of the fuel intake excludes the blocking of fuel supply during deformation of the tank resulting from impacts on the tank by foreign objects. (borders, logs, stones, etc.)
Correct fuel gauge readings. The location of the fuel gauge in the tank and the height of its installation coincide with the original design. This ensures the correct reading of the fuel level indicator arrow on the dashboard.
Our The fuel tank is equipped with a drain plug. This makes it easy to drain and replace low-quality fuel that has fallen into the tank.
Inside our fuel tank of any modification there are partitions. They are designed to reduce disturbances from inertial forces in the fuel when the tank is partially filled. The second function of partitions is to increase the stiffness of the tank. This is deprived of the original Pajero tank, due to the production technology.
On our tanks Pajero 3-4, all modifications, it is possible to install the original protection. To mount the original protection, it must be trimmed!
Our tanks are not banal copies. It is an independent product designed and manufactured for harsh climatic and operational conditions. In their design, all the shortcomings of both the original and other tanks are eliminated. Because of the above characteristics, the stainless steel fuel tank is a leader among all the variety on the market. According to the totality of properties, neither the plastic tank, nor the aluminum, nor the Chinese fakes are worthy competitors to our tanks! About the tanks from other cars supposedly suitable on the Pajero, we will simply keep silent! I would like to draw attention to the fact that each tank we produce undergoes an exit control procedure. One of the points of which is the pressing of the tank with pressure. That excludes the defect of the tank by leakage. And the rest of the control points guarantee : That our tanks do not need any additional procedures when replacing! Such as Cleaning, Washing, Fitting, ETC. The clarity and clarity of the installation of our Pajero 3-4 Fuel Tanks allowed us to gain trust among Pajero owners and service workers. Our products are on the Drive2.ru When replacing the tank, BE SURE to inspect the Filler Neck! Further in the Video there are tips on how to properly install and connect the Fuel Tank on the Pajero of different modifications. We are talking about our stainless steel fuel tanks. (must watch!)
Pajero fuel tank. Long base. Petrol. Pajero fuel tank. Short base. Petrol
Buck Pajero 3-4. It's stainless. Model-Standard. NOVELTY!
This model is designed for buyers seeking to minimize their pajero maintenance and repair costs. Also, this model is suitable for customers for whom the identity and similarity of the new tank in comparison with the original are fundamental. The Standard model is available for purchase only in the long-wheelbase version of the Pajero. In the video we are talking about the fuel tank "Model Standard". It describes the design features, as well as gives advice on replacing the fuel tank and proper installation of the fuel neck.
Technical characteristics of the tank. Model-Standard:
Material – Stainless steel AISI-430 (GOST – 08Х17) Capacity – 77 liters. Wall thickness – 0.8 mm. Weight – 12.5 kg. Petrol/Diesel – Yes Partitions – Yes Fuel retaining cup – Yes Drain plug – Yes The thickness of the mounting brackets – 2.4 mm. Number of mounting points – 6 (original) Installation of native protection – Yes. (for all mounting points) Installation of the original fuel gauge – Yes Installation of the original neck – Yes Installation of the original intake – Yes Installation of native coup valves – Yes Warranty – 2 years For example, from our experience it is reliably known that this Castrol in combination with diesel fuel, in one two applications can damage the coating of the tank!
Additives cannot be added to the fuel!
Relying on our many years of experience repairing and operating Mitsubishi Pajero. We declare that when peeling off the internal coating of the tank, you can forget about the large motor resource of the injection pump. No methods of getting rid of the metallic abrasive in the fuel other than replacing the tank are the solution to the problem! Whether it is the installation of additional filters, cleaning the tank, its sandblasting painting, cooking with subsequent welding, etc. Checked!
New Pajero fuel tank
Which one to buy?
It should also be remembered that gasoline and diesel tanks are different. Not interchangeable and the tanks from the long and short version of your Pajero. For a detailed consultation and order, use the free applications:
or by phone Mob.A1 +375296289915 Megafon +79206621612 or the feedback form. [contact-form-7 404 "Not Found"] You can also buy our items directly in Minsk or from our representatives outside the Republic of Belarus. CONTACTS Below are links to other stainless steel parts produced by us: Pajero Sport 2 fuel tank. Fuel Tank Pajero Sport 1 Pallet Engine Pajero
The fuel tank of the Pajero is stainless steel. Owner's recall.
Buck Pajero stainless steel.Owner's review.
More detailed photos of our stainless steel fuel tanks can be found in the Tank Gallery. Owners of Pajero who, in addition to the fuel tank, need to repair the injection pump should read the following pages of our website. On them we describe in detail the malfunctions of the Pajero 3 fuel pump and the reasons for their appearance. As well as methods of dealing with them. . Repair Injection Pump Pajero 3 4m41 3.2 DID Zexel 2000-2007 Adjustment Injectors Pajero 3.2 DID Filler Neck Pajero 3.4 Pajero 3.4 And clicking on the links below you can examine some typical malfunctions of the Pajero SUV: Replacement of the Pajero hub bearing 3, 4. The stove does not heat! Radiator heater Pajero 3 Pajero 4 Pajero3 Engine temperature arrow Pajero3 Malfunctions Pajero 4 Anticore Below is a list of some of the parts produced by our company: Fuel tank Pajero 2 Stainless steel Tank Patrol Y60-Y61 Tank Pajero Stainless steel. Gallery of tanks.