This article will focus on replacing the original second-generation Mitsubishi Pajero tank with a stainless steel Pajero 2 tank. Manufacturer PSM Belarus.
Fuel Tank Pajero 2. Long base. Stainless steel
Material – Stainless steel AISI-304 (GOST – 08Х18Н10) Capacity – 115 liters. Wall thickness – 1.2 mm. Weight – 18 kg. Petrol / Diesel – Yes Partitions – No Fuel-retaining cup – Yes Drain plug – Yes The thickness of the mounting brackets – 3 mm. Number of mounting points – 4 (original) Installation of native protection – No Installation of the native fuel gauge – Yes Installation of the native neck – Yes Installation of native intake – Yes Fuel intake diesel stainless steel – Yes Warranty – 5 years. Until recently, the fuel tank on the second-generation pajero made of stainless steel was the subject of dreams for the owners of these cars. Currently, the market presents a fuel tank produced by the Republic of Belarus made of stainless steel for the Mitsubishi-Pajero SUV of the Second generation.
Our fuel tank is made of stainless steel AISI304, colloquially called food grade. This is an alloy containing nickel in its composition, which is why our fuel tanks will not rust even after decades. Due to the anti-corrosion properties of AISI304 stainless steel, our tanks are ready for installation and do not require additional corrosion protection.
The steel grade AISI 304 allows us to say that the strength of the walls of the tank from it is one and a half times higher than the strength of the original tank. With a thickness of 1.2 mm, the walls of the tank have the same strength characteristics as black iron, with a thickness of 2 mm.
The fuel tank of our production has an increased capacity, which is 115 liters, which should please lovers of long trips.
Our fuel tank on the Pajero 2 is installed on all standard car mounts, without any alterations. Native ones are used: Filling pipe and overflow hose. The fuel gauge and fuel intake are mounted on native seals. This makes installing our fuel tank on your Pajero 2 simple and fairly quick. Fifth advantage Our fuel tank is equipped with a drain plug, which makes it possible to quickly drain the fuel sludge and the fuel of poor quality that has fallen into the tank. The sixth advantage In our fuel tank, in the area of the fuel receiver, a basket of fuel retention is mounted. Thus, the probability of air intake of the fuel system is minimized. Seventh advantage If it is necessary to replace the fuel receiver, a stainless steel fuel receiver can be installed in our fuel tank. Eighth advantage Our fuel tank does not need additional operations such as: washing, drying, painting, fitting, etc. All of the above gives undeniable advantages to the fuel tank made of stainless steel produced in the Republic of Belarus over all other manufacturers.
Buck Pajero 2 Short Base. Stainless steel
Material – Stainless steel AISI-304 (GOST – 08Х18Н10) Capacity – 77 liters. Wall thickness – 1.2 mm. Weight – 14 kg. Petrol / Diesel – Yes Partitions – No Fuel retaining cup – Yes Drain plug – Yes The thickness of the mounting brackets – 3 mm. Number of mounting points – 4 (original) Installation of the native fuel gauge – Yes Installation of the native neck – Yes Installation of the native intake – Yes Fuel intake diesel stainless steel – Yes Warranty – 5 years. Despite the external similarity of cars of short and long versions, the fuel tanks on them are different. This should be taken into account when ordering the tank.
Buck Pajero 2. Original
As you know, the Mitsubishi automobile brand prefers to use iron fuel tanks in the design of its cars. The fuel tank for the Pajero 2 was no exception. As a result, as on other SUVs of this Japanese manufacturer, the main trouble is the corrosion of the walls of the fuel tank. True, with the problem of through rotting of the fuel tank, the owners of the Pajero 2, face much later than the owners of the third and fourth generations of the Pajero. As a rule, the first to make itself felt is the rusted fuel intake on the Pajero 2. Diesel versions of the car are especially susceptible to this ailment. Characteristic symptoms of a rotten fuel intake in the Pajero 2 tank are: – a long start of the engine, due to air suction through damage in the main of the fuel intake; – The appearance of the so-called "fogging" of the fuel tank. At the same time, there is no direct leak in the tank area. With such a malfunction, the Pajero 2 can be operated for quite a long time until a long start turns into an engine failure to start. Having identified a faulty part, the owners begin to search for a new part. Then, having learned the cost and terms of its delivery, the search area is shifted to the sector of used spare parts. But even here not everything is smooth. Finding a used but well-maintained fuel intake on the Pajero 2 is a daunting task. Someone is trying to solder and then replace the rusted tubes, but it turns out that the tubes are soldered into the flange of the fuel intake with a brass alloy, and for working with brass soldering iron is not enough. Often, the case ends with cold welding, sealant or something similar. Such a solution does not add confidence in the process of operation of the already not new car.
Delivery of the tank to Moscow takes one working day. To the European part of Russia 3-4 days.
After a short period of time, the owner of the Pajero 2 begins to notice the leakage of fuel in the tank area. Thinking it's a well-known fuel intake, the owner discovers, to his horror, that the tank itself has now leaked. The price of a new original fuel tank is not just frightening, but maddening! It is comparable to the cost of the car itself!
Buying a tank
For a detailed consultation and purchase of our tank, use the free services:
or by phone Call Belarus +375296289915 Call Russia Megafon +79206621612 You can also buy our products from us in Minsk or from our representatives outside Belarus. CONTACTS We deliver our products to any city in Russia, the Baltic States, Ukraine, Kazakhstan through Transport Companies.
Calculation of the cost of delivery
To calculate the cost of delivery of the fuel tank, use the form of the transport company KIT. In the empty fields, enter the required information given below. Then click the calculate button.
Technical characteristics of the calculation tank:
City of departure- Minsk City of receipt – City where it is necessary to calculate delivery Dimensions – 80cm / 75cm / / 40cm Volume – 0.24 meters cubic meter Tank weight – 18kg.
To familiarize yourself with our product range below are the links: Pajero Fuel Tank 3 Pajero 4 Fuel Tank Pajero Sport 1 Fuel Tank Pajero Sport 2 Fuel Tank Patrol Y60-61 Throat Pajero 3 Pajero 4 Throat Pajero Sport 1 Pallet Engine Pajero 4M41 https://pajeroservices.com/fuel-tank-pajero/tank-pajero-stainless-steel-photos/